Reservoirs and Bulk Fluid Dispensing Systems

Pail Pump

A simple hand pump for a 5 gallon straight walled pail, suitable for dispensing grease, paste, RTV and silicone dispensing. The manual pail pump can be used for barrel, syringe, or larger cartridge filling, which then can be used for automatic dispensing.

Reservoir Tanks

Reservoirs are used to store and feed bulk fluids. Dispensing reservoirs are either top ported for viscosities less than 35,000cps or bottom ported up to 300,000cps. Versions are available in open top or bottle top. Open top reservoirs can accept liners for materials that need to avoid metal contact. Fluid reservoirs are either aluminum or stainless steel.

Barrel Loaders

An efficient method of transferring greases, epoxies, silicones, solder pastes and other thixotropic materials into a disposable barrel. The barrel loaders can be connected to a DSP501LF dispenser for automatic operation or to shop air for manual control.

PP300-A Clear Reservoir

A see through pressure chamber that accepts 1 lb jars of volatile adhesives, solvents and hazardous substances such as cyanoacrylate. The chamber is also available in acrylic, but the glass model is recommended for volatile fluids dispensing. The PP300-A can be used in manual dispensing using a pinch tube pen or part of an automated dispensing system.

DA35 & 235-871 Extruder Pumps

Extruder pumps are for dispensing high viscosity fluids, such as silicone, grease and paste. The model DA35 is an electric pump and the model 235-871 is pneumatically operated. Both pumps will dispense from 1Kg, 1qt & 1 gallon (3 Kg) cans, the 235-871 is available for 5 gallon pails also. A pressure wiper plate ensures a clean wipe as the fluid is used

I&J Fisnar Inc., 2-07 Banta Place, Fair Lawn, NJ 07410 USA
Phone: (201) 796-1477 Fax: (201) 794-7034 E-mail: info@ijfisnar.com
©I&J Fisnar Inc. 2007