|
Home > Products > Dispensing Valves > High Pressure Valves
|
|
High Pressure Precision Dispensing Valves
|
|
 790HPNM-LF Spool Valve - Liquid Pressure
<2500 psiA high pressure dispensing valve designed to dispense high viscosity fluids such as sealants, silicones, RTV, paste and greases. The valve's seal provides a snap-release shut off after dispensing, creating in a suck-back effect that prevents any dripping. The 790HPNM-LF is designed to be used with the VC-1195A valve controller for faster cycling and sharper cut off.
|
|
 VMS400 Mini Spool ValveMini Spool Valves are engineered to dispense high viscosity fluids with a maximum fluid pressure of 700 psi. The VMS400 is suitable for bead laying and sealing applications and designed for dispensing lubricants, RTV, silicone, sealants, and other high viscosity fluids.
|
|
 LV-0126NM Needle Valve - Liquid Pressure
<3500 psiA high pressure needle valve designed for micro-shot dispensing of high viscosity fluids that need to be pressurized up to 3500 psi. The dispensing valve also has a shot size adjustment feature, which can fine-tune the valve for precise dispensing deposits. The LV-0126 is designed to be integrated with the VC-1195A valve controller for faster cycling and increased accuracy.
|
|
 VC-1195A 4-Way Valve Controller - Faster
CyclingThe VC-1195A Dispensing Valve Controller is designed to provide a faster cycle for any valve that has a secondary air input line. The second air line will snap the valve closed faster than with an internal spring closing system. This will allow for a higher cycle rate and reduce the amount of material that trapped in the valve after dispensing.
|
I&J Fisnar Inc., 2-07 Banta Place, Fair
Lawn, NJ 07410 USA |
Phone: (201) 796-1477 Fax: (201) 794-7034 E-mail: info@ijfisnar.com ©I&J Fisnar Inc. 2007 |